Actual product may vary.
LR
LRE
LR & LRE locknuts uses steel’s elasticity characteristics to securely fix the locknut in the radial direction.
This type of nut is thinner and suited to more narrow applications. The design is very simple and easy to lock. This type of nut is not suitable for high precision requirements as it is more difficult to assure the perpendicularity of the nut at this size.
⚠️ Not applicable for installations where radial set screws cannot be tightened due to space constraints.
| Material Composition： | DIN 42CrMo4 / JIS SCM440 / AISI 4140 |
| Hardness： | HRC28° ~32° |
| Thread Precision： | ISO 4H |
| Manufacturing Method： | High Precision Grinding Run Out M6~M200：0.002mm |
| High Precision Turning Run Out M6~M200：0.005mm |
| Type & Pitch | D | h | d | g | t | Screw Torque n-m | Screw Torque [Nm] | Axial Load Static [kN] | Weight [kg] |
|---|---|---|---|---|---|---|---|---|---|
| LR-M12×1.0P | 24 | 12 | 19 | 4 | 2 | 1-M6 | 8 | 28 | 0.03 |
| LR-M14×1.0P | 26 | 12 | 21 | 4 | 2 | 1-M6 | 8 | 33 | 0.035 |
| LR-M15×1.0P | 30 | 12 | 25 | 4 | 2 | 1-M6 | 8 | 40 | 0.045 |
| LR-M17×1.0P | 32 | 12 | 27 | 4 | 2 | 1-M6 | 8 | 46 | 0.055 |
| LR-M18×1.0P | 32 | 12 | 27 | 4 | 2 | 1-M6 | 8 | 49 | 0.054 |
| LR-M20×1.0P | 35 | 12 | 30 | 4 | 2 | 1-M6 | 8 | 55 | 0.06 |
| LR-M22×1.5P | 35 | 12 | 30 | 4 | 2 | 1-M6 | 8 | 57 | 0.058 |
| LRE-M22×1.5P | 35 | 12 | 30 | 4 | 2 | 2-M6 | 8 | 81 | 0.058 |
| LR-M25×1.5P | 40 | 12 | 35 | 5 | 2 | 1-M6 | 8 | 67 | 0.07 |
| LRE-M25×1.5P | 40 | 12 | 35 | 5 | 2 | 2-M6 | 8 | 90 | 0.07 |
| LR-M30×1.5P | 45 | 12 | 40 | 5 | 2 | 1-M6 | 8 | 81 | 0.085 |
| LRE-M30×1.5P | 45 | 12 | 40 | 5 | 2 | 2-M6 | 8 | 112 | 0.085 |
| LR-M32×1.5P | 46 | 12 | 41 | 5 | 2 | 1-M6 | 8 | 93 | 0.09 |
| LRE-M32×1.5P | 46 | 12 | 41 | 5 | 2 | 2-M6 | 8 | 134 | 0.09 |
| LR-M35×1.5P | 50 | 12 | 45 | 5 | 2 | 1-M6 | 8 | 98 | 0.095 |
| LRE-M35×1.5P | 50 | 12 | 45 | 5 | 2 | 2-M6 | 8 | 136 | 0.095 |
| LR-M38×1.5P | 52 | 12 | 47 | 5 | 2 | 1-M6 | 8 | 102 | 0.1 |
| LRE-M38×1.5P | 52 | 12 | 47 | 5 | 2 | 2-M6 | 8 | 143 | 0.1 |
| LR-M40×1.5P | 55 | 12 | 49 | 6 | 2.5 | 1-M6 | 8 | 104 | 0.105 |
| LRE-M40×1.5P | 55 | 12 | 49 | 6 | 2.5 | 2-M6 | 8 | 157 | 0.105 |
| LR-M42×1.5P | 56 | 12 | 50 | 6 | 2.5 | 1-M6 | 8 | 109 | 0.11 |
| LRE-M42×1.5P | 56 | 12 | 50 | 6 | 2.5 | 2-M6 | 8 | 176 | 0.11 |
| LR-M45×1.5P | 60 | 12 | 54 | 6 | 2.5 | 1-M6 | 8 | 119 | 0.12 |
| LRE-M45×1.5P | 60 | 12 | 54 | 6 | 2.5 | 2-M6 | 8 | 181 | 0.122 |
| LR-M50×1.5P | 65 | 12 | 59 | 6 | 2.5 | 1-M6 | 8 | 135 | 0.131 |
| LRE-M50×1.5P | 65 | 12 | 59 | 6 | 2.5 | 2-M6 | 8 | 205 | 0.131 |
| LR-M52×1.5P | 67 | 12 | 61 | 6 | 2.5 | 1-M6 | 8 | 140 | 0.132 |
| LRE-M52×1.5P | 67 | 12 | 61 | 6 | 2.5 | 2-M6 | 8 | 213 | 0.132 |
| LR-M55×2.0P | 75 | 15 | 68 | 7 | 3 | 1-M8 | 18 | 169 | 0.23 |
| LRE-M55×2.0P | 75 | 15 | 68 | 7 | 3 | 2-M8 | 18 | 229 | 0.23 |
| LR-M60×2.0P | 80 | 15 | 73 | 7 | 3 | 1-M8 | 18 | 185 | 0.256 |
| LRE-M60×2.0P | 80 | 15 | 73 | 7 | 3 | 2-M8 | 18 | 255 | 0.256 |
| LR-M65×2.0P | 85 | 15 | 78 | 7 | 3 | 1-M8 | 18 | 204 | 0.27 |
| LRE-M65×2.0P | 85 | 15 | 78 | 7 | 3 | 2-M8 | 18 | 280 | 0.27 |
| LR-M70×2.0P | 90 | 15 | 82 | 8 | 3.5 | 1-M8 | 18 | 220 | 0.285 |
| LRE-M70×2.0P | 90 | 15 | 82 | 8 | 3.5 | 2-M8 | 18 | 305 | 0.285 |
| LR-M75×2.0P | 95 | 15 | 87 | 8 | 3.5 | 1-M8 | 18 | 237 | 0.305 |
| LRE-M75×2.0P | 95 | 15 | 87 | 8 | 3.5 | 2-M8 | 18 | 331 | 0.305 |
| LR-M80×2.0P | 105 | 15 | 97 | 8 | 3.5 | 1-M8 | 18 | 255 | 0.42 |
| LRE-M80×2.0P | 105 | 15 | 97 | 8 | 3.5 | 2-M8 | 18 | 355 | 0.42 |
| LR-M85×2.0P | 110 | 15 | 102 | 8 | 3.5 | 1-M8 | 18 | 273 | 0.44 |
| LRE-M85×2.0P | 110 | 15 | 102 | 8 | 3.5 | 2-M8 | 18 | 385 | 0.44 |
| LR-M90×2.0P | 115 | 15 | 106 | 10 | 4 | 1-M8 | 18 | 292 | 0.46 |
| LRE-M90×2.0P | 115 | 15 | 106 | 10 | 4 | 2-M8 | 18 | 410 | 0.46 |
| LR-M95×2.0P | 120 | 15 | 111 | 10 | 4 | 1-M8 | 18 | 310 | 0.49 |
| LRE-M95×2.0P | 120 | 15 | 111 | 10 | 4 | 2-M8 | 18 | 450 | 0.49 |
| LR-M100×2.0P | 125 | 15 | 116 | 10 | 4 | 1-M8 | 18 | 325 | 0.51 |
| LRE-M100×2.0P | 125 | 15 | 116 | 10 | 4 | 2-M8 | 18 | 465 | 0.51 |
| LR-M105×2.0P | 130 | 15 | 119 | 12 | 5 | 1-M8 | 18 | 342 | 0.52 |
| LRE-M105×2.0P | 130 | 15 | 119 | 12 | 5 | 2-M8 | 18 | 495 | 0.52 |
| LR-M110×2.0P | 135 | 15 | 124 | 12 | 5 | 1-M8 | 18 | 358 | 0.55 |
| LRE-M110×2.0P | 135 | 15 | 124 | 12 | 5 | 2-M8 | 18 | 520 | 0.55 |
| LR-M115×2.0P | 140 | 15 | 129 | 12 | 5 | 1-M8 | 18 | 377 | 0.57 |
| LRE-M115×2.0P | 140 | 15 | 129 | 12 | 5 | 2-M8 | 18 | 550 | 0.57 |
| LR-M120×2.0P | 145 | 15 | 134 | 12 | 5 | 1-M8 | 18 | 394 | 0.59 |
| LRE-M120×2.0P | 145 | 15 | 134 | 12 | 5 | 2-M8 | 18 | 580 | 0.59 |
| LR-M125×2.0P | 150 | 15 | 139 | 12 | 5 | 1-M8 | 18 | 415 | 0.625 |
| LRE-M125×2.0P | 150 | 15 | 139 | 12 | 5 | 2-M8 | 18 | 610 | 0.625 |
| LR-M130×2.0P | 155 | 15 | 144 | 12 | 5 | 1-M8 | 18 | 435 | 0.65 |
| LRE-M130×2.0P | 155 | 15 | 144 | 12 | 5 | 2-M8 | 18 | 630 | 0.65 |
| LR-M135×2.0P | 165 | 20 | 152 | 12 | 5 | 1-M10 | 35 | 520 | 1.1 |
| LRE-M135×2.0P | 165 | 20 | 152 | 14 | 6 | 2-M10 | 35 | 670 | 1.1 |
| LR-M140×2.0P | 170 | 20 | 157 | 14 | 6 | 1-M10 | 35 | 540 | 1.13 |
| LRE-M140×2.0P | 170 | 20 | 157 | 14 | 6 | 2-M10 | 35 | 690 | 1.13 |
| LR-M145×2.0P | 175 | 20 | 162 | 14 | 6 | 1-M10 | 35 | 570 | 1.15 |
| LRE-M145×2.0P | 175 | 20 | 162 | 14 | 6 | 2-M10 | 35 | 720 | 1.15 |
| LR-M150×2.0P | 180 | 20 | 167 | 14 | 6 | 1-M10 | 35 | 600 | 1.2 |
| LRE-M150×2.0P | 180 | 20 | 167 | 14 | 6 | 2-M10 | 35 | 750 | 1.2 |
| Remarks: ‧ All dimensions in mm. ‧ SAK could custom standard, nonstandard and special nuts, size from M5 ~ M1000 and with a varity of materials. ‧ If left hand thread required, please notify “L” after the Type & Pitch. For example: SR-25×1.5P-L ‧ To prevent the locknuts are in short supply, please send your order in advance. ‧ Subject to technical changes. |
