Actual product may vary.
SA
This locknut employs 3-point axial locking with the same thickness as the SF series. 3 way axial locking is especially applicable to assembly work within special space constraints.
| Material Composition： | DIN 42CrMo4 / JIS SCM440 / AISI 4140 |
| Hardness： | HRC28° ~32° |
| Thread Precision： | ISO 4H |
| Manufacturing Method： | High Precision Grinding Run Out M6~M200：0.002mm |
| High Precision Turning Run Out M6~M200：0.005mm Run Out M210~M300：0.007mm |
| Type & Pitch | D | h | d | n×g | t | Screw n-M | Screw Torque [Nm] | Axial Load Static [kN] | Weight [kg] |
|---|---|---|---|---|---|---|---|---|---|
| SA-M12×1.0P | 30 | 14 | 25 | 4×4 | 2 | 2-M4 | 3.5 | 40 | 0.065 |
| SA-M14×1.5P | 30 | 14 | 25 | 4×4 | 2 | 2-M4 | 3.5 | 60 | 0.055 |
| SA-M15×1.0P | 30 | 14 | 25 | 4×4 | 2 | 2-M4 | 3.5 | 60 | 0.053 |
| SA-M16×1.0P | 30 | 14 | 25 | 4×4 | 2 | 2-M4 | 3.5 | 60 | 0.05 |
| SA-M17×1.0P | 32 | 16 | 27 | 4×4 | 2 | 2-M4 | 3.5 | 60 | 0.07 |
| SA-M18×1.5P | 32 | 16 | 27 | 4×4 | 2 | 2-M4 | 3.5 | 80 | 0.064 |
| SA-M20×1.0P | 38 | 16 | 33 | 4×5 | 2 | 3-M4 | 3.5 | 110 | 0.1 |
| SA-M20×1.5P | 38 | 16 | 33 | 4×5 | 2 | 3-M4 | 3.5 | 110 | 0.105 |
| SA-M22×1.5P | 38 | 16 | 33 | 4×5 | 2 | 3-M4 | 3.5 | 130 | 0.095 |
| SA-M24×1.5P | 38 | 18 | 33 | 4×5 | 2 | 3-M4 | 3.5 | 130 | 0.09 |
| SA-M25×1.5P | 38 | 18 | 33 | 4×5 | 2 | 3-M4 | 3.5 | 130 | 0.091 |
| SA-M27×1.5P | 40 | 18 | 35 | 4×5 | 2 | 3-M4 | 3.5 | 140 | 0.09 |
| SA-M30×1.5P | 45 | 18 | 40 | 4×5 | 2 | 3-M4 | 3.5 | 150 | 0.13 |
| SA-M33×1.5P | 50 | 18 | 45 | 4×5 | 2 | 3-M4 | 3.5 | 160 | 0.15 |
| SA-M35×1.5P | 52 | 18 | 47 | 4×6 | 2.5 | 3-M6 | 8 | 170 | 0.16 |
| SA-M36×1.5P | 52 | 18 | 47 | 4×6 | 2.5 | 3-M6 | 8 | 170 | 0.158 |
| SA-M39×1.5P | 58 | 20 | 52 | 4×6 | 2.5 | 3-M6 | 8 | 210 | 0.22 |
| SA-M40×1.5P | 58 | 20 | 52 | 4×6 | 2.5 | 3-M6 | 8 | 210 | 0.22 |
| SA-M42×1.5P | 62 | 20 | 56 | 4×6 | 2.5 | 3-M6 | 8 | 220 | 0.26 |
| SA-M45×1.5P | 65 | 20 | 59 | 4×6 | 2.5 | 3-M6 | 8 | 240 | 0.274 |
| SA-M48×1.5P | 70 | 20 | 64 | 4×6 | 2.5 | 3-M6 | 8 | 260 | 0.3 |
| SA-M50×1.5P | 70 | 20 | 64 | 4×6 | 2.5 | 3-M6 | 8 | 260 | 0.305 |
| SA-M52×1.5P | 73 | 22 | 66 | 4×8 | 3 | 3-M6 | 8 | 320 | 0.332 |
| SA-M55×2.0P | 75 | 22 | 68 | 4×8 | 3 | 3-M6 | 8 | 340 | 0.34 |
| SA-M56×2.0P | 75 | 22 | 68 | 4×8 | 3 | 3-M6 | 8 | 340 | 0.332 |
| SA-M60×2.0P | 80 | 22 | 73 | 4×8 | 3 | 3-M6 | 8 | 360 | 0.38 |
| SA-M64×2.0P | 85 | 22 | 78 | 4×8 | 3 | 3-M6 | 8 | 400 | 0.41 |
| SA-M65×2.0P | 85 | 22 | 78 | 4×8 | 3 | 3-M6 | 8 | 400 | 0.4 |
| SA-M68×2.0P | 92 | 24 | 84 | 4×8 | 3.5 | 3-M8 | 18 | 470 | 0.54 |
| SA-M70×2.0P | 92 | 24 | 84 | 4×8 | 3.5 | 3-M8 | 18 | 470 | 0.5 |
| SA-M72×2.0P | 94 | 24 | 86 | 4×8 | 3.5 | 3-M8 | 18 | 490 | 0.53 |
| SA-M75×2.0P | 98 | 24 | 90 | 4×8 | 3.5 | 3-M8 | 18 | 500 | 0.59 |
| SA-M76×2.0P | 98 | 24 | 90 | 4×8 | 3.5 | 3-M8 | 18 | 500 | 0.55 |
| SA-M80×2.0P | 105 | 24 | 96 | 4×8 | 3.5 | 3-M8 | 18 | 520 | 0.66 |
| SA-M85×2.0P | 110 | 24 | 102 | 4×8 | 3.5 | 3-M8 | 18 | 540 | 0.712 |
| SA-M90×2.0P | 120 | 26 | 108 | 4×10 | 4 | 3-M8 | 18 | 610 | 0.963 |
| SA-M95×2.0P | 125 | 26 | 113 | 4×10 | 4 | 3-M8 | 18 | 640 | 0.98 |
| SA-M100×2.0P | 130 | 26 | 118 | 4×10 | 4 | 3-M10 | 18 | 660 | 1.05 |
| SA-M105×2.0P | 140 | 28 | 125 | 4×12 | 5 | 3-M10 | 18 | 700 | 1.321 |
| SA-M110×2.0P | 145 | 28 | 132 | 4×12 | 5 | 3-M10 | 18 | 770 | 1.41 |
| SA-M115×2.0P | 150 | 28 | 137 | 4×12 | 5 | 3-M10 | 18 | 820 | 1.45 |
| SA-M120×2.0P | 155 | 30 | 142 | 4×12 | 5 | 3-M10 | 18 | 890 | 1.7 |
| SA-M125×2.0P | 160 | 30 | 147 | 4×12 | 5 | 3-M10 | 18 | 920 | 1.75 |
| SA-M130×2.0P | 165 | 30 | 152 | 4×12 | 5 | 3-M10 | 18 | 950 | 1.827 |
| SA-M135×2.0P | 175 | 32 | 160 | 4×14 | 6 | 3-M12 | 35 | 1000 | 2.355 |
| SA-M140×2.0P | 178 | 32 | 165 | 4×14 | 6 | 3-M12 | 35 | 1080 | 2.28 |
| SA-M145×2.0P | 190 | 32 | 175 | 4×14 | 6 | 3-M12 | 35 | 1130 | 2.855 |
| SA-M150×2.0P | 195 | 32 | 180 | 4×14 | 6 | 3-M12 | 35 | 1200 | 2.91 |
| SA-M155×3.0P | 200 | 34 | 180 | 4×16 | 7 | 3-M12 | 35 | 1280 | 3.17 |
| SA-M160×3.0P | 210 | 34 | 190 | 4×16 | 7 | 3-M12 | 35 | 1360 | 3.88 |
| SA-M165×3.0P | 210 | 34 | 190 | 4×16 | 7 | 3-M12 | 35 | 1400 | 3.963 |
| SA-M170×3.0P | 220 | 34 | 200 | 4×16 | 7 | 3-M12 | 35 | 1430 | 4.12 |
| SA-M180×3.0P | 230 | 36 | 205 | 4×18 | 8 | 3-M12 | 60 | 1600 | 4.565 |
| SA-M190×3.0P | 240 | 36 | 215 | 4×18 | 8 | 3-M12 | 60 | 1670 | 4.772 |
| SA-M200×3.0P | 250 | 38 | 225 | 4×18 | 8 | 3-M12 | 60 | 1850 | 5.13 |
| SA-M210×3.0P | 260 | 38 | 240 | 4×18 | 8 | 3-M12 | 60 | 2200 | 5.36 |
| SA-M220×3.0P | 270 | 38 | 250 | 4×18 | 8 | 3-M12 | 60 | 2200 | 5.57 |
| SA-M230×3.0P | 280 | 40 | 258 | 4×20 | 9 | 3-M12 | 60 | 2200 | 5.84 |
| SA-M240×3.0P | 290 | 40 | 268 | 4×20 | 9 | 3-M12 | 60 | 2300 | 6.037 |
| SA-M250×3.0P | 300 | 40 | 278 | 4×20 | 9 | 3-M12 | 60 | 2400 | 6.21 |
| SA-M260×4.0P | 310 | 40 | 288 | 4×22 | 10 | 3-M14 | 100 | 2500 | 6.5 |
| SA-M270×4.0P | 320 | 40 | 298 | 4×22 | 10 | 3-M14 | 100 | 2600 | 6.425 |
| SA-M280×4.0P | 330 | 40 | 308 | 6×22 | 10 | 3-M14 | 100 | 2850 | 7.35 |
| SA-M290×4.0P | 340 | 42 | 315 | 6×24 | 11 | 3-M14 | 100 | 2950 | 7.611 |
| SA-M300×4.0P | 350 | 42 | 325 | 6×24 | 11 | 3-M14 | 100 | 3100 | 7.85 |
| Remarks: ‧ All dimensions in mm. ‧ SAK could custom standard, nonstandard and special nuts, size from M5 ~ M1000 and with a varity of materials. ‧ If left hand thread required, please notify “L” after the Type & Pitch. For example: SA-25×1.5P-L ‧ To prevent the locknuts are in short supply, please send your order in advance. ‧ Subject to technical changes. |
